Защитный рукав для оптического волокнаАппарат для чистки оптоволоконных коннекторовАппарат для чистки оптоволоконных разъемовОчиститель оптоволоконных разъемов MPOОчиститель оптоволоконного разъема типа "Ручка"Сварочный аппарат для оптоволокна Fujikura 80SСкалыватель оптических волокон PG-OC106Измеритель оптической мощности PG-PON82 PONPG-FS12 Сварочный аппарат для оптоволокна
Сварочный аппарат для оптоволокна Fujikura 80S
World’s quickest splicing 7sec./tube-heating 14sec.
Minimal manual operation.splice in 4 steps.
Multi-functional carrying case with integrated work station.
Absolute robustness
Specifications
Applicable fibers | Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655) |
Cladding dia. | 80-150um |
Cleave length | 5mm to 16mm with sheath clamp |
Splice mode / heating mode | Total 100 splice modes / 30 heating modes |
Splice loss | 0.02dB (SM), 0.01dB (MM), 0.04dB (DSF) and 0.04dB (NZDS) Measured by cut-back method relevant to ITU-T and IEC standards. |
Splice time / tube heating time | Typical 7sec with SM / Typical 14sec with FP-03 (60mm) sleeve |
Splice result storage | Last 2000 splices |
Viewing methods / magnification | 2 axis CMOS camera with 4.73” color LCD. X / Y (320X magnification), or both X and Y simultaneously (200X magnification) |
Tension test | 1.96 to 2.25N |
Applicable protection sleeve | 60mm, 40mm and Fujikura micro sleeves |
No. of splice / heating per battery full charge | Typical 200 cycles with BTR-09 |
Electrode life | 3000 splices |
Size / weight | 146W x 159D x 150H (mm) / 2.7kg (including battery) |
Operating condition | Altitude : 0 to 5,000m above sea level, Wind : 15m/sec Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew |
Resistance features (1) | Shock : 76cm (30inch) all surface drop Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X Rain : H=10mm/hr for 10min, IPX2 |
Other features | PC software upgrade / data management |
Terminals | Terminals USB 2.0 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for HJS-02 or HJS-03 power supply. |
1: Carried out in Fujikura labs in Japan. The shock resistance, dust resistance and rain resistance test do not guarantee that the product will not be damaged under these conditions
© 2021 Top Engineering LLC